Traditional fans in 30 degrees of high temperature days, cooling effect is not good, using central air conditioning is too unrealistic how to do? How to cool down the factory building and bring cool?

 

 

 

Scott mechanical and electrical large fans are widely used in industrial plants, logistics warehousing, waiting rooms, exhibition halls, gymnasiums, Shangchao and other large spaces. Large industrial fans, large negative pressure fans, environmental air conditioning, etc. are common industrial machines for space ventilation and personnel cooling. Industrial fans can push a large amount of airflow to the ground, forming a certain height of horizontal movement of the stratosphere on the ground, thus contributing to the overall air cycle, such benefits lie in the omni-directional ground coverage and the three-dimensional circulation of air. Scott Electronics is a large industrial fan manufacturer with core technology. Maintenance-free for large industrial fans.

 

 

 

Maintenance Method of "Motor and Fan Leaf" of Industrial Fan

 

 

 

Before the maintenance of "motor and fan blade", we need to check the motor. At this time, we want to unplug all kinds of power plugs, check whether the circuit is smooth everywhere in the motor, whether there is disconnection or short circuit at the connection of the line. Also need to pay attention to the industrial fan motor and the fan blade also need to check, of course, it is necessary to first pull out the connecting wires everywhere. Chinese style

 

 

 

Maintenance method 1: tighten and reinforce each screw in the motor. Because the machine is in use in the process of a certain vibration, the screw may also be loosened, if the loose screw is not tightened, it is likely to cause potential safety hazards.

 

 

 

Maintenance method 2: There are some insulation resistors in the motor. These resistors should also be checked to see if they work, especially at the contacts of the resistors. Check whether there are cracks in the fan blade. If the cracks are not replaced in time, the fan blade will fly out easily because of the force.

 

 

 

Maintenance method 3: The air valve is connected with many parts of the machine, which are easy to loosen. If the screw falls off, it should be replaced in time.

 

 

 

Maintenance method 4: Because the fan leaves are exposed to dust for a long time in use, they should be well maintained.