大型吊扇的安装保险工作显得较为重要，相关人士称此类吊扇的运转速度相对较快，而且往往需要24小时不间断工作，甚至许多吊扇在温度较高的车间内工作，连续运行容易造成老化，因此吊扇的运行安全问题至关重要，那么如何保证大型吊扇安全运行呢？

一、定期除尘

 

销量好的大型吊扇在使用一段时间后需除尘，可以避免积累一定量的灰尘,工业扇需保证叶片干净,否则直接影响工业扇的使用效果,甚至影响设备的使用寿命。在清洁普通吊扇时会直接将扇取下，将零件一一清洁，通常工业用的大扇也可采用该种方法，但因大型吊扇很难取下，所以要确认取下后是否能够完全组装。扇叶和悬挂装置一般用水清洗即可，洗完后需保证干燥防止叶片生锈，马达等零件不可水洗，建议使用压缩空气来清洗电子零件。

 

二、设置安装时考虑工厂结构

 

1、大型吊扇的设置必须考虑到工厂的结构，另一方面根据大型节能扇的重量，工厂屋顶需有一定的负荷能力，另一方面还要考虑到工厂结构造成的空气流通问题。大型节能扇的重量大，而且该种重量的大型节能扇旋转时也会带来一定的力量，如此工厂的屋顶结构需要很高的负荷能力才能够保证大型节能扇的正常安装和安全使用。

 

2、这不仅涉及建筑学还涉及空气动力学，由大型吊扇产生的大风量是基于空气流动，如果工厂结构的通风能力不足，价格适中的大型吊扇收集的风量就会大幅减弱，如果工厂的结构太过开放,大型节能扇的空气搅拌效果也大幅减弱,因此大型节能扇的设置位置需严格控制,以保证通风和冷却的效果大幅增加。

The installation and safety of large ceiling fans is more important. Relevant sources say that such fans operate relatively fast and often require 24-hour uninterrupted work. Even many ceiling fans work in workshops with relatively high temperatures Continuous operation is easy to cause aging, so the operation safety of ceiling fans is very important, then how to ensure the safe operation of large ceiling fans? 1. Large ceiling fans with good sales volume of regular dust removal need to remove dust after using for a period of time, which can avoid accumulating a certain amount of dust, and industrial fans need to ensure that their blades are clean, otherwise the use effect of industrial fans will be directly affected Even affect the service life of the equipment. When cleaning the ordinary ceiling fan, the fan will be removed directly, the parts will be cleaned one by one, usually industrial big fan can also use this method, but because the large ceiling fan is difficult to take down, so to make sure that can be fully assembled. Fan Blades and hanging devices can be cleaned with water, after washing to ensure dry to prevent rust, motor parts such as water, recommended to use Compressed air to clean electronic parts. 1. The installation of large ceiling fans must take into account the structure of the plant. On the other hand, according to the weight of large energy-saving fans, the roof of the plant must have a certain load capacity On the other hand, the air circulation caused by the structure of the factory should be taken into account. The weight of a large energy-saving fan is large, and when the large energy-saving fan of this kind of weight rotates, it will also bring certain strength So the roof structure of the factory needs a high load capacity to ensure the normal installation and safe use of large energy-saving fans. 2. This involves not only architecture but also aerodynamics, where the high volume of air generated by large ceiling fans is based on the flow of air, and if the factory structure is not sufficiently ventilated, the volume of air collected by the large and reasonably priced ceiling fans will be substantially reduced If the structure of the plant is too open, the air stirring effect of the large energy saving fan will be greatly weakened, so the setting position of the large energy saving fan should be strictly controlled to ensure the ventilation and cooling effect will be greatly increased.